Purchase Now

Exclusive distribution is handled by our valued partner,

What makes VPL different?

  • Safeguard your valuable assets from equipment failure and power outages with VPL. Our power monitoring system ensures round-the-clock protection for your payload. With wireless connectivity to your WiFi, it also automates regular audit reports, simplifying compliance reporting.

  • Outlet Type: Nema 15A

    Power Supply: 100-240VAC, 50/60Hz

    Data Points: Voltage, Amps, Watts, Power Factor

    RGB LED: Status, Warnings, Alarms

    Dimensions (W x D x H): 4.09” x 2.4” x 1.36”

    Exterior Case: Durable ABS Plastic

    WiFi: 2.4Ghz 802.11 b/g/n

    Security: OPEN/WEP/WPA PSK/WPA2 PSK/WPA WPA2 PSK

    Cloud: Custom code architecture ensures high availability, redundancy, and scalability

  • MCU: Expressif ESP32-S3

    Power Meter Chip: RN8209C

    Communication: WiFi Band 2.4 GHz 802.11 b/g/n

    Supported Protocols: HTTP/HTTPS, MQTT, RESTful API, NTP, MDMS, and ICMP

    Firmware Upgrade: Cloud (OTA) and Local

    Humidity: 0%-95% (No condensation)

    Operating Temperature: (0°C - 40°C)

    Storage Temperature: -10°C to 50°C

    Plug Types: US/EU/FR/UK

    Certifications: UL/FCC/CE/UKCA

Vital Power Log (VPL)

Unlock the full potential of Vital Power Log in this brief video.

Gain hours of advanced notice before a temperature excursion occurs due to a power outage. This extra time can be the difference between saving or losing your payload (stored assets).

Worry less. Let VPL be your

first line of defense for

asset protection.

  • Power Outages or Brownouts

  • Improve Cabinet Recovery

  • Enhance Temperature Stability & Uniformity

  • Maintenance & Mechanical Failures

VPL FAQs

Learn more

  • Explore our resources page for comprehensive instructions on connecting to VPL Wi-Fi and VPL to VitalLog Cloud.

  • No. Each unit requires a dedicated VPL.

  • Voltage, amperage, wattage, power factor, and more

  • Yes. VPL can store up to 12 months of data in offline mode.

  • Yes. Read more about it here.

  • Yes. You can set alerts or warnings for minimum and maximum voltage, watts, and amperage values.

  • Contact support and provide them with the device ID or Serial Number of the device.

  • Yes. You can email them at support@vitallog.com

  • Historical data is available in the Vital Log Cloud if the subscription is active. If logging is enabled, sensor data can also be downloaded in CSV format directly from the VPL device.

  • The locally stored credentials can be cleared by performing a Security Reset. Press and hold the front button on the device for 40 seconds. It will flash red/blue and then go to red.

    You will then need to reconnect the device to your WiFi network by activating AP Mode.

  • To clear locally stored credentials, initiate a security reset by pressing your VPL button for 40 seconds. If you require further assistance, please don’t hesitate to get in touch with us.

  • The VPL is warrantied for the life of the subscription.

Exclusive distribution is handled by our valued partner,